4
4.
Screw back the
Outer Housing
and adjust the camera angle
simultaneously.
360
°
180
°
180
°
5.
Connect the
Power Cable
to a 12VDC power source. Connect the
Video
Output Cable
to a monitor or DVR.
6.
You can use the
Joystick
on the cable to configure camera OSD settings.
Remove the Protection Cap from the Joystick before using it.
UP
DN
Configuring OSD Settings:
•
Push the Joystick up / down to select
among menu items.
•
Push the Joystick left / right to adjust the
level of the selected item.
•
Press the Joystick to enter the submenu or
exit the OSD Setup Menu.