4
b.
If you want to wire the cables through the surface:
Attach and screw the Camera Base to the surface with the supplied 4
Screws, and then attach the Camera Body to the Camera Base.
Wall
Camera Base
Camera Body
4.
Screw back the Outer Housing and adjust the camera angle
simultaneously.
360
°
180
°
180
°
5.
Connect the Power Cable to a 12VDC power source. Connect the Video
Output Cable to a monitor or DVR.
6.
You can use the Joystick on the cable to configure camera OSD settings or
switch to different video formats. Remove the Protection Cap from the
Joystick before using it.
