manualshive.com logo in svg

EverFocus DVR-100H, Instruction Manual, Page: 33 / 55

Share
Download
EverFocus DVR-100H Instruction Manual Download Page 33

MENU

(1) RS232/RS485: 

Choose RS232 or RS485 for activated.

(2) RS232/RS485 ID: 

This entry is used to assign each device with its own ID code, when more than on unit  is 

used in one system through RS232/RS485.

There are two ID code  for the Digital video recorder : 001 or 002

(3) BAUD RATE:

There are 6 different speeds that can be used to transmit instruction or 

information through the RS232/RS485 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud,

19200 baud,and 3840 baud. The default setting from the factory is 9600 baud.

(4) PARITY: 

Select parity lever: NONE/ODE/EVEN

(5) DATA BIT: 

Select data bit : 8 or 7

(6)  STOP BIT:

Select stop bit: 1 or 2

27

RS232/RS485  SETTING MENU  

6.8 RS232/RS485 SETTING MENU

RS232/RS485
RS232/RS485 ID
BAUD RATE
PARITY
DATA BIT
STOP BIT

In the RS232/RS485  SETTING MENU, we define

: RS232
: 01
: 9600
: NONE
: 8
: 2

Left/Right Button

: Press            or              to move the cursor to the left or right 

Up/Down Button

: Press             or              to change the value.

Summary of Contents for DVR-100H
























































Reviews:

No comments