1
Set current time: press / to set the current time
2
Set date and time zone: press and hold for 4 seconds, under "set" blinks, press / to set current time, press to
confirm. “YEAR” shows for 3 seconds then year blinks, press / to set the year, press to confirm; same steps to set
month, day, time zone and DST.
3
Press different function button to set your preferred on/off time and operation circuit, LED indicator turns on to show
the program you selected:
a.
my on time: set your ideal ON time
b.
my off time: set your ideal Off time
c.
sunset on: appliance turns on at sunset time +/- 60 minutes
d.
sunrise off: appliance turns off at sunrise time +/- 60 minutes
e.
my countdown: appliance turns on immediately, and turns off when reaches the countdown time
f.
my extra program: set your own timer, press my extra programs button and Program 1 on will blink. Press /
to choose from 7 on/off programs, press to set the program selected. The time will blink, then set your
timer and operation circuit. Meanwhile, you can press Evening to delete/recover timer (if it shows --:--, press
Evening to activate the timer setting)
4
To cancel the function selected, press the same function button again, the LED indicator turns off
E. Caution
1
ONLY for indoor use.
2
Keep away from children.
3
The voltage and frequency of the connected appliance should be in accordance with the below SPECIFICATION.
4
If the LCD display is not clear, or function is not working properly, please press the Reset Button to reset the device
Caution:
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
