OPERATIONALINSTRUCTIONS
9
T
I
M
E
S
P
E
E
D
D
I
S
T
A
N
C
E
C
A
L
O
R
I
E
S
O
D
O
M
E
T
E
R
S
C
A
N
P
U
L
S
E
M
O
D
E
S
E
T
R
E
S
E
T
OPERATIONAL INSTRUCITONS
USING THE FITNESS METER
POWER ON: Pedal movement or press the button.
POWER OFF: Automatically shuts off after four minutes of inactivity.
MODE BUTTON:
Press to select display functions, including SCAN, TIME, SPEED, DISTANCE,
CALORIES, ODOMETER, and PULSE.
Press and hold for two seconds to reset all functions to zero, except ODOMETER.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES,
ODOMETER, and PULSE in sequence, display changes every six seconds. Press and release the button until
“SCAN” appears on the display.
TIME: Displays the time from one second up to 99:59 minutes.
SPEED: Displays the current speed from zero to 999.99 meters.
DISTANCE: Displays the distance from zero to 99.99 meters.
CALORIES: Displays the calories burned from zero to 999.9 Kcal. The calorie readout is an estimate for an average
user. It should be used only as a comparison between workouts on this unit.
ODOMETER: Displays the total accumulated distance you have traveled from zero to 999.9 meters. The total
accumulated distance is retained when the meter is turned off.
PULSE: Displays your pulse rate in beats per minute. To display pulse, select the PULSE mode and grasp the pulse
sensors on the handlebar, one in each hand. The heart icon will begin flashing when the FITNESS METER senses
your pulse. Your pulse will be displayed approximately five (5) seconds after the heart icon is displayed. If the heart
icon does not appear, relax your grip or change your grip on the pulse sensors.
NOTE: 1. The meter will shut off automatically after four minutes of inactivity. All function values will be kept. Press
the button and hold it down for two seconds to reset all functions to zero, except ODOMETER.
2.The ODOMETER will be reset to zero after batteries are removed for battery replacement or storage of the unit.
HOW TO INSTALL AND REPLACE BATTERIES
1.
Open the Battery Door on the back of the meter.
2.
The meter operates with two AAA batteries, the batteries are not included. Refer to the illustration to install or
replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled according to all state laws and regulations.
5. Do not dispose of batteries in fire.
