background image

IMPACT PC USER’S MANUAL

 

Safety Instructions 

This computer has been tested for conformance to international safety 
regulations.  Like any electronic device, however, the computer should be used 
with care.  To protect yourself from possible injury and to minimize the risk of 
damage to the computer, read and follow all the safety instructions mentioned 
in this manual. 
 

 

Read all of these instructions. 

 

Save these instructions for future use. 

 

WARNING:

 Do not attempt to service the computer yourself.  Opening or 

removing covers might expose you to dangerous voltage points or other risk

,

 

have a qualified person repair it.
 

WARNING:

 Keep hair, loose clothing, fingers, and all parts of body away from 

openings, moving parts and fan 
 

WARNING:

 Do not operate the computer with the cover removed. 

 

WARNING:

 Always disconnect all telephone lines & all power cords from the 

wall outlet before servicing or disassembling this product. To reduce the risk of 
personal injury from electrical shock or hot surfaces, disconnect the power cord 
from the wall outlet, and allow the internal system components to cool before 
touching. 
 

WARNING:

 This equipment is designed for connection to a grounded

 

(earthed) 

outlet.  The grounded type plug is an important safety feature.  To reduce the 
risk of electrical shock, damage to your equipment, or loss of data, do not 
disable this feature. 

Installation Restrictions 

1.  Unplug this product from the wall outlet before cleaning. Do not use liquid 

cleaners or aerosol cleaners. Use a damp cloth for cleaning. Ensure that no 
liquid enters the system. 

2.  Do not use this product near water, in a wet basement or near a swimming 

pool. 

3.  Do not connect or disconnect cables during a thunderstorm. 

4.  Slots and openings in the cabinet and the back or bottom are provided for 

ventilation; to ensure reliable operation of the product and to protect it from 
overheating, these openings must not be blocked or covered. The product 
should never be placed near or over a radiator or heat register, or in a built-
in installation unless proper ventilation is provided. 

 

IV

Summary of Contents for IMPACT GC3000
















































Reviews: