Page | 14
AP1002 Oi Installation Guide
5.
From the WMS navigation pane, select
Access Points > APPROVE DISCOVERED APs.
6.
Select the check boxes of the required Access Point(s) and click
Done
to promote them to the running
state.
7.
During the discovery phase of the AP1002Oi, the AC1K Access Controller verifies the country code of
setting of the AP1002Oi against the country code locked into the AC1K Access Controller Software before
allowing the AP1002Oi to join the network.
•
If the country codes registered in the AP1002Oi non-‐volatile memory and country code locked in to
the AC1K Access Controller software match, the AP1002Oi is allowed to join the network.
•
If the country code registered in the AP1002Oi non-‐volatile memory doesn’t match the locked country code in
the AC1K Access Controller software, the AP1002Oi is quarantined and not allowed to join the network.
When the Access Point is quarantined, the transmitters on the radio modules in the Access Point
are disabled and the Access Point is moved to the discovered state.
•
If the country code in the AP1002Oi non-‐volatile memory is in the default state, the AC1K Access
Controller will register the country code locked to the AC1K Access Controller software into the
AP1002Oi Access Point
1
and allows the AP1002Oi to join the network.
1
Per FCC and IC regulations, any country code selection features are disabled for products marketed to the US/Canada
