20
5PX1-INS-LAB-RevC14 • Paramount XD User Manual
Adjust legrest footplate extension length
See
Adjust footplate extension length
in Footrest—Detachable,
Swingaway section.
Adjust elevating legrest panel position
The legrest panel has three
mounting positions one
inch apart on legrest tube.
Refer to picture at right. To
adjust:
1. Rotate legrest panel /
hinge plate assembly
on legrest tube so that
legrest tube stop is in
center of hinge plate
slot.
2. Slide legrest panel /
hinge plate assembly up or down on legrest tube to desired
position.
3. Rotate legrest panel / hinge plate assembly on legrest tube so
that legrest tube stop is aligned in desired position.
WARNING: Ensure that legrest panels are locked in place
before occupying or operating wheelchair.
CROSSBRACES
Tighten crossbraces
M13 wrench, M6 hex key
Check the crossbraces to ensure that the bolt and nut securing both
crossbraces in the center of the wheelchair are secure (crossbraces
should be loose enough to fold easily, yet snug enough to take up
excess play). Use a M13 wrench and M6 hex key to tighten.
elevating
legrest
legrest tube stop
legrest panel /
hinge plate
assembly
Adjust legrest panel position
Summary of Contents for Paramount XD
Page 31: ......
