3K02-INS-LAB-RevD19 • 22" x 19" Advantage Recliner User Manual
18
6 ADJUSTMENTS
The Advantage Recliner offers several adjustments to make it easier and more comfortable to
drive. Section 6, MAINTENANCE, offers preventive maintenance suggestions for keeping your
wheelchair in excellent condition; ensure that all components are in excellent condition before
adjusting. The following are recommended methods; after a few adjustments, you may develop
your own. Always consult your GF authorized distributor for assistance.
The person performing adjustments on the Advantage Recliner has the responsibility of making
certain that the user can safely operate the wheelchair with the adjustments selected. This
person must evaluate the user's ability, weight, physical condition, the environment in which the
wheelchair will be used, and the terrain over which the wheelchair will travel.
All adjustments and their page locations are referenced in the index at the end of this manual.
Specific tools needed to perform each adjustment are identified in adjustment directions. A
complete list of tools needed to perform all adjustments in this section follows:
Hex wrench furnished with wheelchair
M13 wrench
M10 wrench
M5 hex key
REAR WHEELS & CASTERS
We recommend that you do not replace or adjust rear wheel or caster components yourself, since
special tools and training are required. Please contact your GF authorized distributor when your
rear wheels or casters need adjustment, or if you wish to change seat height.
