6
EASY DECISION
LEDS
Warning:
Make sure to switch off the unit, unplug it from the wall socket and
ensure the bulb has cooled down before attempting to replace the LED bulb.
•
Take out the aluminium filter and screw out the bulb from the inside of
the range hood.
•
Replace with the same type of bulb: o Type: GU10
•
Max Wattage: 2 x 3W
•
Voltage Range: 220 – 240V ~50Hz
•
ILCOS D Code: DR-3/65/1B-H-GU10-46/50
•
Replace the aluminium filter.
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
Fan switch turned off
Select a fan switch position.
Fan switch failed
Contact Everdure Service.
Motor failed
Contact Everdure Service.
Light does not
work, motor does
not work
House fuses blown
Reset/Replace fuses.
Power cord loose or disconnected
Refit cord to power outlet.
Switch power outlet on.
Oil leakage
One-way valve and the air ventilation
entrance are not tightly sealed
Take down the one-way valve and seal
with sealant.
Leakage from the connection of U-
shaped section and cover
Take U-shaped section down and seal.
Lights not working
Broken/Faulty LED lamp
Contact Everdure Service.
Insufficient suction
The distance between the
rangehood and the gas top is too far
Refit the rangehood to the correct
distance.
The Rangehood
inclines
The fixing screw not tight enough
Tighten the hanging screw and make it
horizontal.