5
THE EVOLUTION OF PORTABLE OUTDOOR COOKING
APPLIANCE DETAILS
Gas Type:
ULPG
Burner Pressure:
2.75 kPa
Injector Diameter:
Ø1.30 mm
Heat Input:
22.5 MJ/ hr
Note: The size of the injector diameter is stamped on one of the hexagon faces (e.g. ‘165’ for Ø1.65mm injector).
*NOTE: the height increases by 60mm when the flat lid is placed on the top of barbecue & 220mm if the lid is hung from
the rear of the barbecue.
Air is admitted at the underside of the combustion chamber (a 30mm gap between the fat tray and the
chamber) through 12 oval holes 35mm x 20mm in size, 2 rectangular 75mm x 150mm holes in the base and 2
270mm x 25mm slots in the base. Exhaust gases are emitted through the slots of the grill.
GAS CONNECTIONS
LOCAL AUTHORITY REQUIREMENTS
Check Gas Type and specifications plate on the inside of the left-hand side trolley door. All gas fitting work,
service and repairs can only be performed by an authorized person in accordance with AS5601 and local gas
regulations.
FOR ULPG CYLINDER CONNECTION
1.
To achieve the optimum performance from your Everdure Barbecue, an approved gas cylinder (POL fitting) of
4kg (not for use with the Universal stand) or 9kg capacity must be used.
2.
Do not connect gas to a barbecue that is not secured in a Universal Stand or on a stable raised surface. The
cylinder must be placed in the mounts over the wheel axle and secured with the cylinder bracket of the
Universal Stand when one is used. The cylinder should be lower than the barbecue & in a protected place
when not using a Universal Stand.
3.
Connect the cylinder to the barbecue, via the hose and regulator. Firmly tighten joints, but do not over-
tighten. Take care not to damage the regulator fitting. Check that the gas control knob/valve is in the Off
position before opening the gas cylinder.
NOTE: Only one gas cylinder should be stored in the Universal Stand at any one time.
LEAK TESTING
1.
Make sure the gas control knob is Off and turn the cylinder valve On.
2.
Check for leaking joints by brushing with solution of half-liquid detergent and half water. If a leak is present,
bubbles will appear (or you may hear a hissing sound). Retightening connections can generally repair a
leaking joint. You must also check the gas hose and connection at the gas cylinder. If a leak cannot be
resolved, do not proceed.
DO NOT USE NAKED FLAME FOR LOCATING GAS LEAKS.
IF A LEAK PERSISTS CALL AN AUTHORISED GAS FITTER.
LENGTH (mm)
WIDTH (mm)
HEIGHT (mm)
Barbecue only
620
500
360*
Barbecue and Trolley
750
530
985*
3
4
5
