EVERDIGM EHP 22-A, Instructions For Use Manual

Page: 3 / 23

- 3 -
3. Item:
Key number which shows the referring number of the part in corresponding illustration.
For a revised part which replaces the old one with same item number, the item is not shown.
Item numbers are not always in sequence.
+..... Represent the title assembly containing the entire part in the illustration.
* with the same item number..... Represent selectable parts depending on product version.
4. Part No.: Identification number of the part or assembly.
The part number might be omitted when the part cannot be supplied separately.
5. Part Name: Part name of the part.
The parts without a prefix in front of the part name are independent component parts or
subassemblies belong to the title assembly in corresponding list.
Prefix
‘-‘…. The parts marked with the prefix ‘-‘ in front of the part name are component parts
belong to the subassembly shown above of the rows of these parts.
Prefix
‘--‘… The parts marked with the prefix ‘--‘ are component parts of the ‘-‘ marked
subassembly containing these parts.
6. Qty: Quantity used for one unit of their parent assembly containing the parts.
When the quantity of the title assembly is blank, refer to the page shown with
‘►’, but when it is
not blank, it represents the quantity used for one unit of the product.
For the parts with the prefix
‘-‘ or ‘--‘ in front of their part name, the quantity is expressed with that
prefix.
AR
… As many as required (variable quantity depending on the product)
7. S/N: Serial number of the product which those parts are applied
Parts without serial no. indications are used in every product regardless of serial number.
8. Remarks: Supplementary comment. Refer to the following for the code within [ ].
A
….. The parts with this code can be used interchangeably with each other.
R
….. The part with this code is no longer manufactured as a result of a revision and replaced by
the new part whose part number follows this code.
K
….. The part with this code is contained in the service kit whose item number follows this code.
D
….. The part with this code cannot be supplied separately. The assembly part containing this
part should be ordered.
S
….. Non-standard part which can be supplied by separate order
How to order parts:
Please note the full model name and serial number of your product. This code can be found on the nameplate of your
product. Compare the parts to order with the corresponding parts in the drawings in this parts manual and note the part
numbers to order.
When ordering parts, please specify detail part names as shown in the following example,

Model name of product: RX-20

Serial number: 135

Part No.: A123-4567

Part name: Pin

Quantity: 2

Purchaser
’s name & address:
. . . .