Technical Information
WARNING! Failure to follow
these instructions may result
in serious injury.
Make sure no obstacles are in the desk’s path.
Make sure the desktop is not touching any walls.
Make sure all cords are an appropriate length to
accommodate the changes in height.
This height adjustable desk has electric motors and is designed for
use in dry work areas only. The desk height is adjustable so that it can
be positioned at the most ergonomically suitable height. Any other
use is at the user’s risk. Under no circumstances does E
accept warranty claims or liability claims for damages caused from
improper use or handling of the desk frame.
Keep Children away from electric height-adjustable
desks, control units and handsets. There is a risk of
injury and electric shock.
Do not sit or stand on the desk frame.
Do not crawl or lie under the desk frame.
Do not place any objects taller than 20”
underneath the desk.
Do not open or dismantle any of the components -
the Legs, Control Box, or Switch. There is a danger of
electric shock.
This product is designed with a duty cycle of 10%.
(2 minutes on, 18 minutes off.
i
In the event of a power outage or if the power cords
is unplugged, a manual reset may be necessary.
i
Please scan the QR code for a video
version of our Assembly Manual, or visit
www.everdeskplus.link/lite-assembly
for more information.
Lite Frame Assembly Information
Reset Up-Down Controller
Ensure that the desk it at its lowest height before
attempting any reset functions.
• Lower the desk to the minimum height
(lowest possible height).
• Press and hold the Down Key for about 10 seconds,
then release.
• Hold the Down Key again. The desk should lower itself
further before raising slightly.
• The table is now reset.
