background image

7

1.3 Battery Monitor
1) The “Battery Monitor” function can display the current input voltage value of the refrigerator, helping the user
understand the current battery level.
2) Enable the "Battery Monitor” function:

Press and hold down the “SET” button for more than 5 seconds (but within 10 seconds);

3) Exit the "Battery Monitor" function:

After the "Battery Monitor" function is activated, press the “SET” shortly then can exit the function

4) After the “Battery Monitor” function is enabled, the current input voltages of the refrigerator will be indicated as below:
Voltage values

Indicators

10V

“1” FLASHING

10V - 11V

“2” FLASHING

11V - 12V

“3” FLASHING

12V - 13V

“4” FLASHING

≥13V

“5” FLASHING

1.4 Power cut memory

In case of power outage, the refrigerator will maintain the running state that is set before power failure after the
power recovery.

1.5 Power-on delay

In order to protect the refrigerator compressor from being damaged in the case of short-time power failure, the
compressor will start after it is powered on for 5 minutes.

1.6 Overvoltage or undervoltage protection

In order to prevent damage to the refrigerator and the battery itself caused by abnormal or insufficient battery voltage,
the refrigerator is designed with undervoltage and overvoltage protection function, so that the refrigerator will be
compulsorily powered off or the compressor will be shut down for protection once this function is activated, with the
corresponding alarm indicator ON. (See the following self-checking function table)

1.7 Self-checking function
1)

The refrigerator is designed with self-checking function. In case of failure, the indicator will be flashing for alarm

purpose.
2)

Indicator alarm rules are as follows:

S/N

Fault Display

Item Information

1

Fridge sensor fault

Indicator light “1”keeps flashing

2

Ambient temp. sensor fault

Indicator light “2”keeps flashing

3

Freezer defrosting sensor fault

Indicator light “3”keeps flashing

4

Undervoltage alarm

Indicator light “4”keeps flashing

5

Overvoltage

Indicator light “5”keeps flashing

6

Fan failure

Indicator light “1”and “3”keeps flashing

3)

When the refrigerator indicator lights are flashing in the above manner, please contact for maintenance;

Summary of Contents for SRD-360WTG-E

















Reviews: