background image

 

HOMEDEPOT.COM 

 

 

Please contact 1-877-297-6069 for further assistance. 

Safety Information  

 

 

CAUTION: 

Know  the  pump  and  its  applications, 

limitations, and potential hazards. 

 

 

CAUTION: 

Periodically  inspect  the  pump  and 

system  components  to  ensure  the  pump  intake  is 
free of mud, sand, and debris. Disconnect the pump 
from the power supply before inspecting. 

 

 

CAUTION: 

Follow  all  safety  standards  and  all  local 

electrical codes. 

 

ELECTRICAL SAFETY  

 

 

 

 

WARNING: 

Do  not  allow  the  electrical  cord  plug  to 

be submerged. 

 

 

WARNING: 

Do not use extension cords. They are a 

fire  hazard  and  can  reduce  voltage  sufficiently  to 
prevent pumping and/or damage the motor. 

 

 

WARNING: 

Do  not  handle  or  service  the  pump 

while it is connected to a power supply. 

 

 

WARNING: 

DO  NOT  remove  the  grounding  prong 

from the plug or modify the plug. To protect against 
electrical  shock,  the  power  cord  is  a  three-wire 
conductor  and  includes  a  3-prong  grounded  plug. 
Plug  the  pump  into  a  3-wire,  grounded,  grounding 
type  receptacle.  Connect  the  pump  according  to 
electrical codes that apply. 

 
 

Warranty 

The manufacturer warrants to the original consumer purchaser of the pre-plumbed sewage system that it will be free from 
defects in material and workmanship for the Warranty Period of 12 months from date of purchase. The date of purchase 
shall be determined by the original dated sales receipt noting the model number of the system. The original sales receipt 
must accompany the returned system. If the system fails during the warranty period, disconnect the power, disconnect all 
plumbing and piping, empty any water from the pump and return the pump to The Home Depot along with the receipt. 

The manufacturer shall not be liable under this Warranty for any product that, in our sole judgment, has been subject to 
negligence,  misapplication,  improper  installation,  or  improper  maintenance.  Also,  the  manufacturer  shall  not  be  liable 
under this Warranty if the product has been disassembled, modified, abused, or tampered with; if the electrical cord has 
been  cut,  damaged  or  spliced;  if  the  pump  discharge  has  been  reduced  in  size;  if  the  pump  has  been  used  in  water 
temperatures above the advertised rating, or water containing sand, lime, cement, gravel or other abrasives; if the product 
has been used to pump chemicals or hydrocarbons; or if the label bearing the system model has been removed. 

Your sole remedy, and 

the manufacturer’s only duty, is that the manufacturer repair or replace defective systems (at the 

manufacturer’s choice). You must pay all labor and shipping charges associated with this warranty. No request for service 
will be accepted if received after the Warranty Period has expired. This warranty is non-transferable. 

The  manufacturer  shall  not  be  liable  for  any  consequential,  incidental,  or  contingent  damages  whatsoever.  The 
manufacturer  recommends  using  a  professional  plumber  for  all  installation  and  repair,  and  periodic  inspection  of  the 
manufacturer’s  pumps,  plumbing  connections,  and  electrical  cord.  The  manufacturer  makes  no  warranty  regarding  the 
suitability of a product for a particular installation. 

This warranty excludes all industrial, agricultural, commercial, and business usage of this system. 

The foregoing warranties are exclusive and in lieu of all other express and implied warranties, including but not limited to 
the  implied  warranties  of  merchantability  and  fitness  for  a  particular  purpose.  The  forgoing  warranties  shall  not  extend 
beyond the duration expressly provided herein. 

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration 
of the implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal 
rights  and  you  may  also  have  other  rights  which  may  vary  from  state  to  state.  This  warranty  applies  to  only  pumps 
installed in the United States of America and Canada. 

This warranty supersedes and replaces all previous warranty publications. 

Contact the Customer Service Team at 1-877-297-6069 or visit www.HomeDepot.com.

 

WARNING: 

Do not splice the electrical power cord. 

Summary of Contents for THD1100











Reviews: