PRIMING AND FUNCTION CHECK
“tap-tap”
For the function test, hold
the Pen pointing upwards
and gently tap the cartridge
sleeve, so that the
air can rise to the top.
Press the push-button.
A few drops of medicine will
emerge. If no drops emerge,
repeat steps 1-4.
Dial the required dose by turning the dosage wheel
clockwise. You can correct the dose by dialling anti-
clockwise if needed. Look at the display to see if you
have dialled the required dose.
Dial the test dose forward by
turning the dosage wheel.
Check the dose by looking
at the display, so that the
symbol is clearly displayed.
1
2
3
4
SETTING THE DOSE
INJECTING
Press and hold the push-button fully down during the
medication discharge.
After the medication has been
completely discharged, wait for
6 seconds and ONLY then pull
out the Pen needle.
Check that the display is as the 0.0 position to confirm
full dose delivery.
1
2
3
AFTER YOUR INJECTION
1
2
Attach the outer needle protective cap to the needle,
remove the Pen needle and dispose in accordance
with local regulations.
Attach the Pen cap securely after each use.
1
3
After you have removed the needle, you can change
your cartridge if needed.
