8
NexLog Recorder User Manual v2.2.0
2. Recorder Setup
2.1. Unpacking the Recorder
CAUTION
Use care and assistance when lifting and handling the recorder. The NexLog 740
weighs approximately 50 pounds (23 kg). The NexLog 840 can weigh as much as
95 pounds (43 kg)!
Check the box for damage. A crushed box, holes, or water damage, for example,
could indicate that the recorder has been damaged. Open the box and inspect
the recorder and associated accessories. If the equipment appears damaged
contact Eventide right away and
save the damaged box and packaging!
Check that the unit is delivered with the expected configuration and accessories.
The packing slip states the contents. In addition, the box will include:
A configuration sheet indicating installed audio input boards and other I/O
boards
A warranty registration card
One archive medium per removable archive drive
One power line cord per power supply module
One server software DVD disk labeled “Eventide NexLog Software”
This document
Other accessories may be included, depending on your order. For example, you
may receive client disks and additional documentation for the client software.
2.2. General Specifications
2.2.1. NexLog 740 and NexLog 840
All Eventide NexLog Recorders are based on identical server (recorder) software
and client (PC user) software. The primary differences among different units in
the product line are physical, e.g., size, power, storage configuration, etc. The
following table highlights the differences among the products. This is a
summary only and does not replace the individual unit specifications.
