Event Lighting TSUNAMI-IP, User Manual

Page: 5 / 7

5
www.event-lighting.com.au
Chinese
Display Normal
Reverse Flip 180°
Backlight On Always on
30s Off after 30 seconds of inactivity
DMX Fail Blackout Blackout when DMX signal lost
Hold Keep last DMX value when DMX signal
lost
Factory Settings No
Yes Reset to factory settings
System Info RDM UID
Version Software Version
DMX Channel Current DMX channel mode
Run time Total usage time
User time Time since power on
Temperature Current temperature
DMX Chart
This fixture is controlled by the universal DMX 512 protocol. The DMX address is the first channel
used to receive instructions from the external controller. For independent control, each fixture must
be assigned a unique address for each of its control channels. For example, this device has three
channel modes: 7/14/42, if it’s set to 7 channel mode, and there are several fixtures need to be
independently controlled, we just simply address first fixture at 1, and second fixture at 8, third one
at 15, etc.
•
If multiple fixtures have the same DMX address, they will behave synchronically.
•
Display will flash when no DMX signal is received.
Mode/Channel Min
DMX Max
DMX
7
Ch 14
Ch 42
Ch Function Description
1 1 1 Tilt 0 255 Tilt Movement
2 2 Tilt Fine 0 255 Tilt Fine Movement
2 3 3 Beam Dimmer 0 255 Strobe Dimmer, 0-100%
3 4 4 Beam Mode 0 5 No Strobe
6 42 Strobe Mode 1
43 85 Strobe Mode 2
86 128 Strobe Mode 3
129 171 Strobe Mode 4
172 214 Strobe Mode 5
215 255 Strobe Mode 6