Event Lighting PAR12x8A, User Manual

Page: 8 / 10

www.event-lighting.com.au
7
Set multi fixture chases Pr 07
Before starting, go to each fixture and reset the menu to fixture defaults.
1. On the master unit, setup the DMX address to the total number of fixtures in the string. For example, you may
have a total of 20 par cans including the master, so the DMX address should be set to “20”.
2. On the master unit, go to master/slave menu setting and set the unit to master
3. On the master unit, set the unit to “Auto Mode” “Pr 07” which supports multi fixture chases.
4. On each slave unit, setup the DMX address to the fixture position in the string. For example, if this unit is the
2nd unit in the string including the master, then set the DMX address to 2. If this the last unit of 20, then the
DMX address should be set to 20. It is possible to double up fixture positions as well as fixture 1.
5. On each slave, go to the master/slave menu setting and set it to slave.
Master/Slave Operation
Set the master fixture to one of the stand-alone operating modes: automatic, sound, static color or manual color modes.
Set the slaves, entered "Mas/Sla" mode, set to “S”, press “Enter” to confirm.
DMX Chart
2 channels Mode
Channel Value Function
1 000-255 Warm white to cool white
2 000-255 dimmer 0% ~ 100%
3 channels Mode
Channel Value Function
1 000-255 Red: 0% ~ 100%
2 000-255 Green: 0% ~ 100%
3 000-255 Blue: 0% ~ 100%
4 channels Mode
Channel Value Function
1 000-255 Red: 0% ~ 100%
2 000-255 Green: 0% ~ 100%
3 000-255 Blue: 0% ~ 100%
4 000-255 RGBW Model : White: 0% ~ 100%
RGBA Model : Amber: 0% ~ 100%