15
www.event-lighting.com.au
-
If the devices have the same address, they will behave synchronically.
-
Display is flashing when no DMX signal is received.
More functions
-
RDM. RDM stands for “Remote Device Management”, with this function, users can realize remote control of the
device, such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as
temperature, power consumption, fan speed. Etc. Every single device has a unique RDM code programmed at
manufacture to distinguish from each other. It is not recommended for users to change this code.
-
Software upgrade function via DMX cable. If there is any new firmware for this device, it can be upgraded simply via
a software upgrade box, no need to change any mechanical parts. The upgrade box is not included in the package,
if need any further assistance please just contact your authorized dealer.
-
Hibernation. The device will enter sleeping mode if activated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as the DMX signal is sent again.
-
Display back-up communication IC. There is a back-up communication IC installed in the display PCB, so users
could replace at once if the original one is broken.
-
Display flip. By press up and down button for more than 3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
Technical Specifications
Power
-
Input Voltage: 100~240V AC, 50/60 Hz
-
Power Consumption: 420W
-
Connection: Neutrik® PowerCON – In
Photometric
-
Light Source: Advanced 6500K 300W White LED Module
-
Beam Angle: 6° to 48°
-
Output: 18000 lumen, 89700 lux on @2.5M
-
PWM: 1200Hz
-
LED Lifespan: 60,000 hours
Effects
-
Dimming: 0 ~ 100%
-
Strobe: 0.5 ~26 Hz
-
Focus: Linear via DMX
-
Prism: 3 Facet & Frost
-
Iris: Yes
-
Zoom: Linear via DMX 6° to 48°
-
Movement 8 / 16 bit Auto Reposition
-
Pan: 630°( 4.0 sec) or 540°( 3.58 sec)
-
Tilt: 265°(2.8 sec)
Colour
-
Liner CMY & CTO
-
8 C Open
