17
www.event-lighting.com.au
Pulse opening & Pulse closing
Pulse Slow to Fast
0
255
14
16 Iris
Indexed
0
191
Pulse opening With Forward Backout
192
207
Pulse opening With Reverse Backout
208
223
Pulse closing With Forward Backout
224
239
Pulse closing With Reverse Backout
240
255
24 25
15
17 Control
Normal
0
7
Reset All
8
15
Pan&Tilt Reset
16
23
Color Reset
24
31
Gobo Reset
32
39
TBD
40
47
Other Reset
48
55
Display Off
56
63
Display On
64
71
TBD
72
79
TBD
80
87
Hibernation
88
95
TBD
96
255
The device is controlled by universal DMX 512 protocol, DMX address is the start channel used to receive instructions
from the external controller. For independent control, each fixture must be assigned its unique address control channels.
For example, this device has four channel modes: 24/25/15/17, if we set the mode at standard 24 channels mode, and
there are several models need to be independently controlled, we just simply address first fixture at 1, and second
fixture at 25, third one at 49, etc.
-
If the devices have the same address, they will behave synchronically.
-
Display is flashing when no DMX signal is received.
More functions
-
RDM. RDM stands for “Remote Device Management”, with this function, users can realize remote control of the
device, such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as
temperature, power consumption, fan speed. Etc. Every single device has a unique RDM code programmed at
manufacture to distinguish from each other. It is not recommended for users to change this code.
-
Software upgrade function via DMX cable. If there is any new firmware for this device, it can be upgraded simply via
a software upgrade box, no need to change any mechanical parts. The upgrade box is not included in the package,
if need any further assistance please just contact your authorized dealer.
-
Hibernation. The device will enter sleeping mode if activated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as the DMX signal is sent again.
-
Display back-up communication IC. There is a back-up communication IC installed in the display PCB, so users
could replace at once if the original one is broken.
-
Display flip. By press up and down button for more than 3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
