2
www.event-lighting.com.au
Safety Instructions
Warning
•
Do not open this device, there is no user-serviceable parts inside. Risk of electric shock.
•
Do not look at the light source when the device is on.
Caution:
This unit's housing may be hot during and after operation.
•
Install this device in a location with adequate ventilation, at least 50 cm from adjacent
surfaces.
•
Do not leave any flammable material within 50 cm of this unit while operating or connected to
power.
•
Use a safety chain when mounting this device overhead.
•
This product is rated IP65, meaning it is protected against dust and water jets from all
directions. Do not operate this device in any location where excessive heat or water beyond
the IP65 specification may affect it.
•
Do not operate this device if the housing, lenses, or cables appear damaged.
•
Do not connect this device to a dimmer or rheostat.
•
ONLY connect this device to a grounded and protected circuit.
•
ONLY use the hanging bracket to carry this device.
•
In case of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 40° C. Do not operate this device at higher
temperatures.
Power Input and Power Linking
This device has an auto-switching power supply that works with input voltage range of 100~240 VAC,
50/60 Hz.
Link up to a maximum of 8A. Do NOT exceed this.
Product Installation
•
This fixture can be mounted in many orientations
provided each individual fixture is secured by the
use of correct mounting bracket.
•
Use a safety chain when mounting this device
overhead.
