9
INSTALLATION MANUAL AND USER GUIDE
ENGLISH
LED LIGHTS
The SensorSafe chest clip LED lights are designed to tell you two
things: (1) if the chest clip is connected to the app, and (2) if the
battery is fully charged or low. This table shows how the LED lights
on the front of the chest clip will behave:
Slow Blinking = Full Battery
BLUE LIGHT = Connected
A blue light indicates that the
clip is connected to the app.
1 red blink per second until the
Sensor Safe clip is connected
(up to 30 seconds)
2 slow blue pulses indicate a
successful connection
10 rapid red blinks indicate
a low battery while the clip
is not connected
10 rapid blue blinks indicate
a low battery while the clip
is connected
Rapid Blinking = Low Battery
RED LIGHT= Not Connected
A red light indicates that the
clip is not connected to the app.
REPLACING THE BATTERY
1. Loosen the Harness by pressing the
Harness Release Button on the front of
the Child Restraint and pulling forward
on both Harness Straps.
2. Unbuckle Harness by pressing the
button on the Crotch Buckle and pulling
out both Buckle Tongues.
3. Open Chest Clip by pressing the
Release Button and pulling the Chest
Clip apart.
4. Turn the male side of the
Chest Clip over and loosen
the screw with a #0 x 2½”
Phillips screwdriver. Remove
cover with screw in place.
