manualshive.com logo in svg

Evenflo Maestro, Owner'S Manual

Share
Download
Evenflo Maestro Owner'S Manual Download Page 11

19

18

5. Connect and tighten tether strap.  

Connect the tether hook to the anchor behind the 
vehicle seat, as shown. (Please consult your vehicle 
owner’s manual, as tether anchor locations may vary.) 

  Pull the strap and tighten the tether securely.

     Installation with lower anchor 

     connector assembly

Installation with Seat Belt

1. Disconnect tether 

hook from the back 

of the child restraint. 

 

Tether Strap

2. Place the child  

restraint in  

position. 

  Set child restraint on 

vehicle seat in 

     forward-facing position. 

Lay the tether strap over 
the back of the vehicle 
seat.

3. Route vehicle seat 

belt through belt 

path and buckle it, 

as shown.

Vehicle Belt 

Path

Using with the 5-pt Harness

The Tether Strap that comes with your child restraint 

will be one of the two types below.

A

B

Tilt and slide the 

adjuster 

A

 to loosen.

Press the adjuster release 

button 

B

 to loosen.

IMPORTANT:

 

If you are using the vehicle seat belt to 

secure the child restraint, 

DO NOT

 use the lower anchor 

connector assembly.

IMPORTANT:

 If your tether strap is too short to reach from 

your child restraint to your vehicle tether anchor, you will need 

a Tether Extender. Please call ParentLink at 1-800-233-5921 

(U.S.) or 1-937-773-3971 (Canada), or 01-800-706-12-00 

(Mexico).

Summary of Contents for Maestro


























Reviews:

No comments

Brands by name

Popular brands

Load more brands