background image

72

If the level line is not level with the ground, use a 

tightly rolled towel or small blanket beneath the 

front edge of the child restraint to provide enough 

recline for an infant’s head to lie back comfortably.

IMPORTANT:

 Infants may have difficulty breathing 

when in a sitting position. Make sure they recline 

enough for their head to lie back comfortably and 

safely. Failure to properly recline the child restraint 

could increase the child’s risk of serious injury or death.

• Strangulation Hazard: Child can strangle in loose restraint straps. 

   Never leave child in carrier when straps are loose or undone.

• The child restraint can roll over on soft surfaces and suffocate your child. Never place this child 

restraint on beds, sofas, or other soft surfaces.

• Never place this child restraint near the edges of counter tops, tables, or other elevated 

surfaces. The child's movements can cause the child restraint to slide. 

• To prevent an accident 

or injury to your child, never place child restraint in any position in a shopping cart. 

• Pull up on the child restraint when locking on to base to ensure 

it is securely fastened into the base.

• DO NOT USE WITHOUT INSTRUCTIONS!

 If the owner’s manual is missing, call ParentLink at

1-800-233-5921 (U.S.) or 

1-937-773-3971 (Canada)

for a free replacement.

When used without the base, 

arrow 

MUST

 be level with the 

ground.

WARNING!

DEATH or SERIOUS INJURY can occur,

25805686  5/15

Rear of Vehicle

• Strangulation Hazard: Child can strangle in loose restraint straps. 

   Never leave child in carrier when straps are loose or undone.

• The child restraint can roll over on soft surfaces and suffocate your child. Never place this child 

restraint on beds, sofas, or other soft surfaces.

• Never place this child restraint near the edges of counter tops, tables, or other elevated 

surfaces. The child's movements can cause the child restraint to slide. 

• To prevent an accident 

or injury to your child, never place child restraint in any position in a shopping cart. 

• Pull up on the child restraint when locking on to base to ensure 

it is securely fastened into the base.

• DO NOT USE WITHOUT INSTRUCTIONS!

 If the owner’s manual is missing, call ParentLink at

1-800-233-5921 (U.S.) or 

1-937-773-3971 (Canada)

for a free replacement.

When used without the base, 

arrow 

MUST

 be level with the 

ground.

WARNING!

DEATH or SERIOUS INJURY can occur,

Rear of Vehicle

5

Installing the Carrier without the Convenience 

Base (cont.)

Installing the Carrier 

WITHOUT the Convenience Base

To remove, unfasten the vehicle belt.

Summary of Contents for LiteMax 35

























































































































Reviews: