19
1. Secure convenience base to the
vehicle seat.
a
Convenience base is securely installed with
lower anchor connector assembly (shown)
(pages 20-22).
OR
a
Convenience base is securely installed with
vehicle seat belt (pages 23-25).
IMPORTANT:
A properly secured convenience base
does
NOT
move more than 25 mm (1 in.) from
side-to-side or from front-to-back
at the lower
anchor connector assembly/vehicle belt path
.
a
Locking clip is installed, if necessary (p. 41).
a
Convenience base is adjusted so that level
indicator is completely green (pp. 21 and 23).
a
If necessary, a towel/small blanket is rolled up
and placed beneath the front edge of the base
for additional leveling (p. 26).
2. Secure child to the carrier.
Refer to p. 33.
a
Harness straps are at, or below, shoulder level
(p. 36).
a
Both buckle tongues are fastened (p. 33).
a
Chest clip is connected and positioned at
armpit level (p. 34).
a
Harness straps are snug against the child and you
should not be able to pinch the harness (p. 34).
a
Crotch strap is snug against the child but
NOT
under the child’s bottom (p. 38).
3. Check your work.
a
The convenience base does
NOT
move more
than 25 mm (1 in.) from side-to-side or from
front-to-back
at the lower anchor connector
assembly/vehicle belt path
.
a
The base is level with
only
green (no red)
showing in the level indicator window (pp. 21 and
23).
a
ALWAYS
place the handle in one of the
following positions when traveling in a vehicle:
U.S. -
Positions 1, 4 or 5
;
Canada -
ONLY
Position 1
(p. 16).
Installation Checklist
Installation Checklist –
WITH
the Convenience Base
