background image

22

TOC

23

1. Place the booster seat on the vehicle seat.
2. Set the child in the booster seat.

  

Make sure the child’s back and bottom are flat against 

the back and bottom surfaces of the booster seat.

3. Adjust the back of the booster, if necessary.

 

Adjust the backrest so the shoulder belt guides are level 

with the top of the child’s shoulders. This will cause 

the shoulder belt to properly lay midway between the 

child’s shoulder and neck (see Adjusting the Backrest, 

page “Adjusting the Backrest” on page 27).

4. Secure the child and booster seat to the vehicle 

seat. 

Stretch the lap/shoulder belt across the child and fasten 

the buckle. Make certain the shoulder belt is threaded 

through the shoulder belt guide. 

5. Check your work. 

Make sure the lap belt is stretched low and snug across 

the child’s hips, beneath the armrests (both Lap 

and Shoulder belts), and fastened into the buckle. 

The shoulder belt must cross the child midway between 

his/her shoulder and neck.

IMPORTANT

Always secure the booster seat with the vehicle seat belts 

when not occupied. An unsecured booster seat can fly into 

and injure other occupants in the event of a crash.

The shoulder belt 

MUST NOT

 cross the child’s neck or fall 

off the child’s shoulder. If you can not adjust the shoulder 

belt to properly lay midway between the child’s shoulder 

and neck, try another seating location or do not use the 

booster seat. 

Installation Checklist

WARNING

Shoulder Belt: Must cross 

midway between child’s 

shoulder and neck.

Lap Belt: Stretched 

low and snug across the 

child’s hips, beneath the 

armrests, and fastened 

into the buckle.

Child Requirements

• Weight: 18 – 45.3 kg (40 – 100 lbs)

• Height: 112 – 145 cm (44 – 57 in.) and tops of the 

child’s ears are at or below the top of the booster seat 

headrest.

• Age: At least 4 years old

IMPORTANT: Once your child exceeds any of the size 

requirements above, you 

MUST

 discontinue use of this seat. 

Your child may be ready for use of the vehicle belt system 

only at this time.

Using Your Booster Seat 

with the Backrest

Summary of Contents for big kid sport


















Reviews: