background image

18

19

Using the Shoulder Belt Clip

Using the Accessories

Not available on all models.

• 

DO NOT

 use the cup holder to store cans or hard cups.  

Only for use with soft cups (such as styrofoam or paper).  

• 

DO NOT

 place any cups that contain hot liquids (such as 

coffee or tea) in the cup holder.

• 

DO NOT

 snap any other items to this booster seat unless 

it has been certified for use with this specific booster seat.

WARNING

Using the Activity Lights

Not available on all models.

A

Press either of the two activity light lens 

A

 on each side 

of the headrest to turn on or off. 

1.

 

Remove the shoulder belt clip harness 

A

 from the 

storage area 

B

 beneath the booster 

C

.  

Note:

 Be sure to remove rubber band around the 

strap and dispose of properly. 

2.

 

Place booster 

C

 on the vehicle seat and attach the 

shoulder belt clip 

A

 to the vehicle shoulder belt 

D

.  

3.

 

Pull the adjustment strap 

E

 until the belt clip 

A

 

is even with the child’s shoulder, and the vehicle 
shoulder belt 

D

 lays across the child’s chest midway 

between his/her shoulder and neck.  

E

D

A

4.

 

To store the shoulder belt clip harness, fold it and 
place it in the storage area 

B

A

C

B

B

Cup Holder

Cup Holder

Summary of Contents for Big Kid/Right Fit
















Reviews: