1.
Remove the backrest from the booster seat.
(See Removing the Backrest, page 19.)
2.
Place the booster seat on the vehicle seat.
3.
Set the child in the booster seat.
Make sure the child’s back is flat against the vehicle
seat and the child’s bottom is flat against the booster
seat.
4.
Secure the child and booster seat to the vehicle seat.
Stretch the lap/shoulder belt across the child and
fasten the buckle.
5.
Use the shoulder belt clip, if necessary.
If the shoulder belt does not properly lay midway
between the child’s shoulder and neck, attach and
adjust the belt clip (see Using the Shoulder Belt Clip,
page 20).
6.
Check your work.
Make sure the lap belt is stretched low and snug
across the child’s hips, beneath the armrests, and fas-
tened into the buckle. The shoulder belt must cross
the child midway between his/her shoulder and neck.
Note:
If the vehicle’s shoulder belt naturally crosses the
child’s shoulder, you do not need to use the shoulder
belt clip.
The shoulder belt
MUST NOT
cross the child’s neck
or
fall off the child’s shoulder. If you cannot adjust the
shoulder belt to properly lay midway between the child’s
shoulder and neck, try another seating location or do
not use the booster seat.
Child Requirements
Weight:
18 to 49.8 kg (40 to 110 lbs)
Height:
102 to 145 cm (40 to 57 inches)
Age:
At least four years old
Ears below the top of the vehicle headrest
16
17
IMPORTANT
Always secure the booster seat with the vehicle seat belts
when not occupied. An unsecured booster seat can fly into
and injure other occupants in the event of a crash.
WARNING
Installation Checklist
Using Your Booster Seat
Without the Backrest
The shoulder belt
MUST
cross midway between
child’s shoulder and neck.
Use belt clip, if necessary.
The lap belt is stretched low
and snug across the child’s
hips, beneath the armrests,
and fastened into the buckle.
Autogoods “130”
130.com.ua
