24
Place the base on the
vehicle seat.
Route the lower anchor connector strap and hook
through the lower anchor connector strap openings.
Refer to your owner’s manual to locate the
lower anchor bars on your vehicle seat.
Attach the right hook to the right anchor bar and the
left hook to the left anchor bar.
DOUBLE CHECK
that
the hooks are fully engaged by pulling hard on the
lower anchor connector strap.
2
1
Before you begin, be sure the vehicle is
on a level surface.
DO NOT
use this child restraint if it moves more than 2.5 cm
(1 in.) side-to-side or front to back at the vehicle seat belt path.
Serious injury or death may occur. Move the child restraint to
another seating location or try to tighten the lower anchor
assembly again.
Using your full weight, push the base firmly into the vehicle seat,
while pulling up on the strap to tighten.
The lower anchor connector assembly strap must be as
tight as possible.
If you can move the child restraint more than 2.5 cm (1 in.)
side-to-side or front to back at the vehicle belt path, the lower
anchor connector assembly strap is not tight enough. You will
need to try again or find another location for your child restraint.
Installing the Convenience Base
with the Lower Anchor Connector
Assembly System (cont.)
WARNING!
DEATH or SERIOUS
INJURY can occur.
