5
EN
4. Safety instructions
4.3 How to use the charging device
WARNING!
Electric shock hazard.
Always use and charge your scooter in a dry environment. Never use the
scooter in a wet or moisty environment. Depose the item properly.
Use the charger only for charging your scooter’s battery. A specific charging device should only be used
for a designated specific battery as there is a fire risk, otherwise.
Only connect the line cord of the charging device to an isolated ground receptacle, which is readily ac-
cessible and was properly installed. The isolated ground respectable has to correspond with the net volt-
age according to the descriptive plate of the charging device. The isolated ground respectable has to re-
main readily accessible in case you should have to disconnect the line cord.
To disconnect the apparatus from the mains, pull the connector, not the line.
Lay the cables in a way you cannot stumble over.
Never bend or squeeze the line cord. Keep it away from hot surfaces, lubricants, moving parts and sharp
edges.
Make sure that enough air reaches the charging device. The charging device heats while charging make
sure that it is not covered.
Use your charging device only in dry indoor places and never outdoor. Use your charger only for your
scooter’s battery. Never use it to charge any other battery or non-rechargeable batteries.
Stop using your charger if the housing or electrical wiring is damaged or the charger does not work properly.
A damaged charger cannot be repaired and has to be scrapped. Only replace it by a new one which is
identical in construction. It is available at our customer support.
