Setting up Spectrum
17
4. Connect the AC adapter and power cord.
Connect the power cord to the AC adapter and plug the other end into a grounded AC outlet.
Then connect the adapter to the DC power connector on the rear of the monitor.
CAUTION: To reduce the risk of electric shock or damage to the equipment:
-
Plug the cord into a grounded (earthed) outlet. Do not disable the power
cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
-
Disconnect power from the monitor by unplugging the power cord from
the AC outlet. Do not pull on a cord or cable. When unplugging from the
AC outlet, grasp the cord by the plug.
-
Do not place anything on power cords or cables. Care should be taken to
route or arrange all cords and cables connected to Spectrum so that they
cannot be pulled, grabbed, stepped on, or tripped over.