8
that you do not damage the wiring during installation.
6. Re-install filter.
7. Plug in the power to the unit, turn on and test.
Notice
：
When the rangehood is re-circulating, carbon filters should be installed. This
unit needs to be pre-installed with a carbon filter.
WARNING:
➢
For safety reason, please use only the same
size of fixing or mounting screws which are
recommended in this instruction manual.
➢
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Start Using Your Cooker Hood
Toggle switch
1.Lamp
– Turn on/off light
“O” – to switch off light
“I” – to switch on light
Power
– Slide out drawer, power on; slide in drawer, power off.
2 .Speed
–select speed to suit cooking conditions
“O” – to switch off motor
Low( I )
– light frying/boiling
Medium( II )
– frying/wok cooking/heavy boiling
High ( III )
– grilling, intensive frying and wok cooking
Power
– Slide out drawer, power on; slide in drawer, power off.
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
Fan switch turned off
Select a fan switch position.
Fan switch failed
Contact service center.
Motor failed
Contact service center.
