EVE FDW560, Instruction Manual

Page: 9 / 13

-8-
Installation Instructions
4
CONNECTING DISPOSER TO SINK FLANGE
1 ATTACH TO SINK FLANGE
Line up the disposer
under the sink flange
Guide the hopper
projections into the
mount ring slots Turn
the mount ring about
1 4 to the right so that
the disposer is
temporarily supported
.
.
/ "
.
Mount
Ring Slot
Hopper
Projection
2 LINE UP WITH OUTLET PIPE
Turn the mount ring and the disposer until the
disposer discharge elbow lines up with the outlet
pipe See page 9 .
( )
Outlet pipe
Discharge
Elbow
3
LOCK MOUNT RING
Turn the mount ring to the right until it locks up tight
Hopper projections must be to the extreme left of
the mounting slots If the mount ring is hard to turn
you may add a small amount of petroleum jelly or
liquid soap to the hopper projection Run water and
check for leaks
.
. ,
.
.
Locking Detail
Hopper Projection in
Supported Position " "
Hopper Projection in
Position "Locked"
Mounting
Ring
4
CHECK FOR LEAKS
Check the unit for leaks 24 hours after installation and
first operation
.
IMPORTANT :
'
, .
Don t put your head or body under
disposer unit could fall during installation