EVE
Audio product manual
Operating Modes
9
OPERATION
thanks to the incorporated swiveling „Mid/High Silver Plate.“ By default,
your monitor is adjusted to be placed vertically. To use it in horizontal
position, turn the tweeter/mid-driver section 90º so that the sound
transducer is still vertically oriented. Your dealer will be happy to do this
for you. If you would like to do it by yourself after the monitors have been
installed, follow these steps:
•
Remove the four screws of the mid/high plate.
•
Turn the whole tweeter/mid-driver section 90º. The direction does not
really matter. Hold the tweeter/mid-driver section by the screws when
handling it.
•
Fasten the tweeter/mid-driver section again with the screws. Tighten the
screws only a bit tighter than you would by hand.
1
3
2
!
The whole procedure ought to be carried out with utmost care in order not
to damage the surface of the speaker.
3.3.
Operating Modes
Standby mode | Volume mode (-10 dB) | Settings menu (Low Filter @ -2 dB)