EVCO S.p.A.
This document belongs to EVCO; unless you are authorized by EVCO, you can not publish it.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
EVCO does not take any responsibility about features, technical data and possible mistakes related in this document.
Phone +39-0437-8422 • Fax +39-0437-83648
EVCO does not take any responsibility about damages coming by the non-observance of the additional information.
[email protected] • www.evco.it
EVCO reserves the right to make any change without prior notice and at any time without prejudice the basic safety and operating features.
6
CONFIGURATION PARAMETERS
6.1 Configuration parameters
PARAM. MIN.
MAX. U.M.
DEF.
t1
(1)
(2)
l
10
t3
00:00 99:59 min:s
00:05
t5
0,1
100
- - -
10
t7
0
1
- - -
0
t8
0
1
- - -
0
t9
0
1
- - -
0
t10
0
1
- - -
0
t11
0
1
- - -
0
(1) the value depends on parameter t5 or on parameter t11:
• 0 if parameter t11 has value 0
• 0.5 if parameter t11 has value 1 and parameter t5 has a value greater or equal to 2
• 10 if parameter t5 has value 0.1
(2) the value depends on parameter t5 or on parameter t11:
• 9,990 if parameter t11 has value 0
• 999.0 if parameter t11 has value 1 and parameter t5 has a value greater or equal to 2
• 9,990 if parameter t5 has value 0.1.
LITERS COUNTER
number of liter of water to count
duration of the activation of the buzzer to the end of the count
number of pulses corresponding to a liter of water
0.1 = 1 pulse will correspond to a 10 l of water
kind of count
0 = count down
1 = count up
display colour
0 = green
1 = red
kind of contact pulses counter input
0 = NO (input active when moving from open contact to closed contact)
1 = NC (input active when moving from closed contact to open contact)
kind of contact start input
0 = NO (input active when moving from open contact to closed contact)
1 = NC (input active when moving from closed contact to open contact)
resolution
0 = 1 l
1 = 0.5 l
