EVBox 9842424180, User Manual

Page: 11 / 150

EN
11
Troubleshooting
LED ring status
What you see What it means What to do
LED ring off
or green
Wall box is ready for use. Plug the charging cable into the Wall Box.
LED ring
green, flashing
Your charge card is
being verified.
Wait until LED ring turns blue.
LED ring
yellow
The car is fully charged.
Unplug the charging cable from the Wall Box
and place it back into your car.
LED ring
yellow, flashing
Charging session is in
queue (applicable in the
Smart Charging environ-
ment only).
When power becomes available, charging will
start or resume, and the LED ring will turn blue.
LED ring
blue
Wall box is charging
the car.
The car is charging.
LED ring
red
Wall box is experiencing
an error.
Check the troubleshooting chapter in this man-
ual for solutions. If this does not solve the issue,
contact your installer or supplier.
LED ring
red, flashing
Your charge card is not
authorized to charge.
Check the troubleshooting chapter in this man-
ual for solutions. If this does not solve the issue,
contact your installer or supplier.
LED ring
purple, flashing
The Wall Box identifies
itself to the user during
the bluetooth pairing
process
Continue the bluetooth pairing process.