2. PEDAL ASSISTANT
www.EVBIKE.cz
Importer:
Global World Logis
ti
c Ltd., EU-VAT ID: CZ682998344
1) When you start pedal, the pedal assistant will automa
ti
cally adjust motor power.
2) To install this part, you have to remove spindle. Removing requires special tools (Fig. 1a, 1c).
3) Disassemble the bike parts as shown at the Fig. 9.
4) Mout plas
ti
c wheel with magnets in correct direc
ti
on of rota
ti
on (shown on wheel by arrows). Because of variety
of the assembling of the sensor (Fig. 10), the arrow on the sensor doesn't always match the direc
ti
on of pedaling.
Correctness sensing should always be veri
fi
ed. Final
ti
ghtening you can leave at the end of the whole installa
ti
on.
5) There must be aprox. 2 mm space between plas
ti
c wheel and sensor. Depending on the type of bicycle,
the distance between the magnet wheel and sensor could be too small respec
ti
vely large. Sensor ring sleeve can be
rotated and sensor bolted from the other side (Fig. 10).
6) Assembly all parts back. Before
fi
nal
ti
ghtening you should check the correct func
ti
on of pedaling detec
ti
on.
7) Before
fi
nal
ti
ghtening of all screws is necessary to check the correct func
ti
oning of pedaling detec
ti
on.
2. PEDAL ASSISTANT
2 mm
If you mount kit on a scooter, or operate it only in accelerator mode, you can skip pedal assistant assembly.
TIP
9
spindle
bike frame
Crankset
pedal
pedal
assistant
sensor
pedal assistant
plas
ti
c wheel with magnets
removable
ring
2 mm
10
All manuals and user guides at all-guides.com