![EVBIKE EVBAT36V13A-S Installation Manual Download Page 9](http://html1.mh-extra.com/html/evbike/evbat36v13a-s/evbat36v13a-s_installation-manual_2441687009.webp)
Importer: GWL POWER a.s. CZ25948253
Škroupova 631/6, 500 02 Hradec králové
Checking the charge status
To check the charge status of the battery, press the button with the symbol.
Depending on the current discharge status, the corresponding number of LEDs will light up.
The number of LEDs illuminated indicates the discharge status. If only the red LED is lit, the
battery must be recharged.
discharged
25%-50%
50%-75%
75%-100%
Remove and insert the battery into the holder
To unlock the battery lock, turn the key anti-clockwise. In unlocked position, it is not possible to
remove the key from the lock. Turn the lock clockwise to lock the battery out of the holder (the
key can be removed in this position). Always remove the key when driving and handling the wheel.
To remove the battery from the bracket, proceed as follows. In the unlocked position, grasp the
battery from the side with both hands and push it forward towards the control elements by
approx. 10 mm. Now the battery is released and can be pulled up out of the holder by pulling it
upwards.
WARNING:
The battery must always be locked and the key off the lock while driving.
Unlocking
Ejection
Releasing