07/08
Pair with the 2nd Bluetooth® Device
1. After connecting with the 1st Bluetooth® device, press the Pairing
Button once, and the indicator “TX” will flash quickly.
2. Turn on and place your 2nd Bluetooth® device close to the
adapter (within 3 feet / 1 meter) and pairing will be completed
automatically. Once successfully paired, the indicator “B” will turn
solid on, and the Codec indicator for the current streaming
codec will light up.
Additional Features
Automatic Power Off
If the adapter is not connected to any devices, it will automatically
power off in 10 minutes. In Bluetooth connection state, if it exceeds
the effective Bluetooth range, it will disconnect and automatically
power off in 10minutes.
Note:
The default input mode is SPDIF. When the AUX cable is plugged
in, it will switch to AUX mode automatically.
Note:
· After connecting with two Bluetooth® devices, the Codec
indicator for the lowest codec supported by both devices will
light up.
· After disconnecting with one of the devices, the Codec
indicator for the highest codec supported by the remaining
device will stay on.
· Make sure your optical cable is plugged in SPDIF IN port/AUX
in TX mode.
