evatronic 001710, Manual

Page: 10 / 21

10/21
- Do not connect this unit to a power strip. If possible, the use of
extension cords should be avoided. If this is unavoidable, products
that meet the applicable electrical standards should be used.
- This product must not be connected to an external timer or
remote control system.
- This product must not be used or stored near heat sources
(heaters, stoves, etc.)
- Never immerse the unit and its power cord in water or any other
liquid.
-Never connect the unit with wet or damp hands as this may cause
an electric shock.
-Before use, please check that the product, its cable and plug are
not damaged.
- Before first use, be sure to remove all parts of the packaging that
could affect the proper functioning of the product.
- Before connecting the product, make sure that the start button is
set to "off".
-Always disconnect the unit after use to avoid overheating.
-Do not bend and pull the cable. Never move the unit by pulling the
power cord. Do not place the cable on an abrasive or cutting
surface or in a position that could damage it.
-Do not block all or part of the air inlets and do not insert objects
into them.
-During operation, do not touch the product if you are wet.
-If you notice any malfunction in the operation of the unit, turn off
and unplug the unit immediately.
-Do not place the fan in a place where curtains could get caught in
it.
- Never leave the appliance unattended within reach of children,
whether it is running or not.
- Warning! Warning! Once installation is complete, it is strictly
forbidden to remove the fan protection grids for cleaning or
maintenance.
-Ensure that the fan is switched off from the supply mains before
removing the guard.