— For personal safety and proper functionality of the device use only clean,
untainted tap water. If the source of water is polluted and you are not sure
about its safety, please use distilled water. It is recommended to perform
the cleaning and technical maintenance of the device according to the
“Cleaning and maintenance” section of this product guide.
— The device is not intended for use in a highly polluted environment.
Large dust particles, dirt, etc., can seriously affect the longevity of the
device’s evaporative cartridge lifecycle.
— Make sure that water does not spill onto the external parts of the device.
Do not use it near water, in a swimming pool, bathroom, laundry room,
outdoors when raining or at any other location with high humidity levels.
— In the case of a leak or if water spills onto the surface of the device,
immediately disconnect the power cord and let the device dry for at least
24 hours.
— Do not place the device under direct sunlight.
— If you do not plan to use the device for a long time, empty the water
reservoir and let the device run at maximum power for at least 4 hours
to allow the cartridge to dry out.
— Use only the original power supply from the package.
— Do not touch the power supply or power cord with wet hands.
— Unplug the device during the following actions: cleaning, technical
maintenance, removing/replacing elements and moving the device.
— To maximise the effect the device should be placed on an elevated
surface, e.g. a table or a cupboard.
— Do not place the device next to a heater or within proximity of any
electrical equipment.
— Do not place the device in passageways or any other location from
where it will cause obstruction and can be accidentally knocked over.
— Do not let any foreign objects enter the device.
— Do not place heavy items on top of the device.
INTRODUCTION
Congratulations!
You have bought your own personal evaSMART air cooler from Evapolar.
To take full advantage of the device, please install the Evapolar Mobile
Application and read the product guide before you start using it.
Intended use:
The evaSMART air cooler is designed to cool and humidify the personal
zone around you by creating a local microclimate within an area of 3 - 4 m2
(30 - 45 ft2). It also has a purification effect; filtering large dust particles
from the air. evaSMART is operated through the mobile application, Smart
Home integrations or via the device menu. The best effect can be achieved
indoors and in well-ventilated rooms.
Safety regulations:
— The device must be placed onto a smooth horizontal surface.
Tilting it may cause a water leak and damage the device.
— Do not carry the device when it is filled with water. Even after you empty
the reservoir, some water will still remain in the internal compartment.
Please refer to the section of this manual about device transportation.
4
5