Model WDH-816EAH Instruction Manual
2
CONTROL PANEL
___________________________________________
Model WDH-816EAH Instruction Manual
3
COMPONENT DESCRIPTION
__________________________________
OPERATION
_____________________________________________
WARNING!
Before first use always allow the appliance to stand in a vertical
position for 2 hours before use if the appliance has been on its side.
Place the appliance in a suitable position on a level even surface away from
other objects and combustible material (refer to safety instructions).
Keep away from direct sunlight and other heat sources.
Connect to a suitable 10 amp 220-240V ~ AC Earthed power supply outlet.
Ensure that the supply cord is fully unwound before use. A wound supply cord
may overheat. Do not overload the circuit. It is recommended that this
appliance be used on a circuit of its own.
Ensure the water tank is placed correctly into the appliance. Note - If on first
use the “TANK FULL” lamp is on, remove the water tank and reinstall it.
Switch the power supply on to appliance.
POWER
. Press “POWER” button. Operation will commence.
HUMIDITY SETTING
. A setting of “60%RH” is recommended. This can be
altered by pressing the up / down buttons located on control panel (range
30% to 90%).
