TIMER
You must set the time prior to programming the Timer. To do this turn; the outer dial of the timer in a
clockwise direction until the time of the day (24-hour clock) corresponds with the triangular marking.
Example if it is 2pm (1400 hours) then set the triangular mark in line with 14. One complete turn of the dial
corresponds to 24 hours.
There are 96
“riders”, positioned around the dial, each rider represents 15 minutes.
Where all the
“riders” are pushed to the outside of the timer the heater will be ON continuously.
To set a specific time for example:
If you want the heater to be on from 6pm to 10pm, then set all the riders from 18 to 22 (1800 hours to 2200
hours) to the outside of the rim and all other riders to the inside of the timer. The unit will then turn on
automatically at 6pm and off again at 10pm.
WARNING: Take care in positioning your heater. Using the Timer will mean the heater will come on
automatically. Fire may result if the heater has been placed next to combustible material.
Indicates actual time
Riders pushed to the
outside rim to turn
ON
TECHNICAL SPECIFICATION
Model No:
TWOC200-7T
Supply:
220-240VAC 50Hz
Wattage:
1500W
Model No:
TWOC200-9T
Supply:
220-240VAC 50Hz
Wattage:
2000W
Model No:
TWOC200-11TH
Supply:
230-240VAC 50Hz
Wattage:
2300-2400W
Summary of Contents for TWOC200-7T
Page 8: ......
