LOCATION AND SAFE USE OF YOUR ELECTRIC OIL HEATER
(continued)
Manual Operation.
Once the heater has been installed correctly in position, connect the supply
plug to a suitable power outlet. Ensure the thermostat, Timer and any heat
control switch is set to ‘Off’ before plugging in. Turn power on.
Select the desired heat setting on the heat selection switch.
Set the thermostat to the desired setting, lower for cooler room
temperature, higher for hotter room temperature.
Set the timer auxiliary override switch to Manual (I).
The indicator lamp indicates that the power is ON and heating.
Timer Operation (Refer photo for function).
Once the heater has been installed correctly in position, connect the supply
plug to a suitable power outlet. Ensure the thermostat, Timer and any heat
control switch is set to ‘Off’ before plugging in. Turn power on.
Set the current time on the time clock (24 hour – rotate clockwise to
adjust).
Set the desired ON/OFF times on the time clock (pull outwards each
Red button at the selected ‘turn on’ time.
Select “Timer” (Left position) setting on the auxiliary timer override
switch.
Select the desired heat setting on the heat selection switch.
Set the thermostat to the desired setting, lower for cooler room
temperature, higher for hotter room temperature.
When the timer passes the selected time points the heater will switch
‘On’ automatically, heating will begin. The timer will switch heating ‘Off’
automatically once the timer has passed the selected time points.
Set the timer auxiliary override switch to Manual (I) to return to
manual use.
Warning!
Fully unwind the supply cord before use. Do not
use with the supply cord wound up, this will cause
overheating of the supply cord and risk of fire.
Page 5 of 5
