Evans TV Bed Assembly Manual Download Page 12

Page: 12 / 13

Evans TV bed safety information.

GENERAL INFORMATION

It is very important not to place any vessel containing liquids, e.g. drinks or vase of ﬂowers on top of the TV footboard that may

accidentally spill and enter the TV compartment as this could cause damage to the TV and/or the TV lifting equipment. If this happens
turn o° the power and c ontact your retailer.
Do not expose the bed to an  undue  level of heat - keep  away from radiators.
Never allow  anyone  to sit on the foot end of the bed - keep children  well away from moving parts.
To keep  your bed clean,  we recommend  that it be wiped over with a slightly dampened  cloth or if fabric, use a  light vacuum cleaner;
disconnect  power before cleaning.
Supplied  with the bed is a remote control to operate the TV Lift and  one to operate the TV itself.  Both these remotes  are supplied
with batteries that last a reasonable amount of time  - there are no batteries in  the rest of the equipment.
When it is time to change the batteries there are strict controls for disposal  of the old ones - your local council can advise
on how to safely dispose  of them. Never burn batteries on an  open fire as they  could explode.

IMPORTANT POWER INFORMATION

Before fixing the slats to the bed, please follow the instructions below:
Plug in the main power supply lead (q) supplied with your bed; this is packed inside the accessory box which is underneath the bottom
of the footboard inside Pack 2, see Page 4.
It is essential that this power lead is connected to an earthed socket be it a wall socket or extension lead - otherwise there is risk of
damage or even electric-shock.
The wall socket providing the power must be accessible at all times in case you need to switch o˜ the electric supply.
Power cable supplied with this bed or other approved mains powered extension leads used to power your equipment, must not be
placed where they can be walked on - this is dangerous and could lead to accidents.
Power outlets, extension leads or adapters must not be overloaded beyond their limit - this can result in fire or electric shock.
During an electrical or lightening storm - disconnect the power completely as a precaution.
Always un-plug the power when going on holiday or when the bed is not used for an extended period.
If you have young children in the home always disconnect the power at the wall socket for extra safety.
Do not interfere with or modify any cables already fitted and do not add any media cables unless they are routed through the ducts as
shown in Step 7. All leads must be tightly connected to back of TV, never hanging loose where they can get trapped.
Never touch moving parts or any part of the equipment - if something needs to be checked, disconnect the power first.
Do not insert anything into the footboard as this could seriously damage the TV and/or the TV lifting equipment and could, if done
carelessly, cause serious damage or injury.
If the equipment doesn't operate normally or if there is any unusual noises, disconnect the power and contact your retailer for advice.

TELEVISION INFORMATION

Please follow the assembly steps for initial operation the TV and TV Lift in the current order:
Withdraw the TV power plug from the left hand duct by pulling the red string as shown in Step 4.

Push the plug into it's own special socket which is on the face of the footboard - this socket is only to be used for the TV,

it does not have a constant power supply.

Recover the remote control (u) from the accessory box then r

aise the TV Lift by pressing the

top UP

button

then

carefully

remove

any remaining

transit protection material.

The bed comes with a 32" SMART TV already fitted,