9
6. Error Codes
Code
Reason / Solution
ERR1
Thermistor is Unplugged
- Contact EvaKool
ERR2
Thermistor is Short Circuited
- Contact EvaKool
E1
Low Voltage
• Please check the source voltage to ensure it is above the cut out . Try
lowering the voltage cut out setting to LOW .
• The vehicle cabling may be inadequate/unsuitable, please refer to
cable specifications table for correct cable thickness (page 5) .
• Try on a different power source .
E2
Fan Issue
• Fan is drawing too many Amps (Over 1 Amp) .
- Contact EvaKool
E3
Compressor Start Issues
• Unplug for 10 minutes .
• Try on a different power source .
• Possible Electronic Box or compressor fault .
- Contact EvaKool
E4
The Compressor Speed is Too Low
• Unplug for 10 minutes .
• Reduce product load inside unit .
• Move unit to a lower ambient temperature .
• Clean vents / ensure clear air flow over compressor .
E5
Ambient Temperature Too High
• Clean vents / ensure clear air flow .
• Fan fault .
- Contact EvaKool
