01. PRODUCT SAFETY
SAFETY WARNINGS
The stoves were built in compliance according to standard EN13240 (wood stoves), EN 14785 (pellet stoves) and EN 12815 (kitchens and wood-burning
stoves)using high quality and non-polluting materials. To make better use of your stove it is advisable to follow the instructions in this booklet.
Read this manual carefully before use or any maintenance operation.
Eva Stampaggi aims to provide as much information as possible to ensure safer use and to avoid damage to persons, property or parts of the stove itself.
Each stove is subjected to internal testing before shipment and as such residues inside the appliance may be found.
KEEP THE INSTRUCTION MANUAL FOR FUTURE REFERENCE
IF ANY CLARIFICATIONS ARE REQUIRED CONTACT YOUR AUTHORISED DEALER
•
The combustion of waste, especially of plastic materials, damages the stove and the vent pipe. Moreover, it is forbidden by the law against the emission of
harmful substances.
•
Do not use alcohol, petrol or other highly inflammable liquids to light the fire or poke it during operation.
•
Do not introduce into the stove an amount of fuel greater than that recommended in this booklet.
•
Do not modify the product.
•
It is forbidden to use the appliance with the door open or the glass broken.
•
Do not use the appliance as, for example, a clothes drying rack, a bearing surface or step etc.
•
Do not install the stove in bedrooms or bathrooms if not certified as watertight.
The pellets to be used are the following:
Pellet stoves operate exclusively with pellets (tablets) of various wood essences that comply with DIN plus or EN plus 14961-2 A1 or PEFC/04-31-0220
ONORM M7135 or that have the following characteristics:
Calorific value min. 4.8 kWh/kg (4180 kcal/kg)
Density 630-700 kg/m3
Maximum humidity 10% of weight
Diameter: 6 ±0.5 mm
Ash percentage: max. 1% of weight
Length: min. 10mm - max. 30mm
Composition: 100% untreated wood from the industry of wood or post-consumption without the addition of binders, bark-free and compliant with current
regulations.
02. GENERAL SAFETY PRECAUTIONS
•
Use the stove only as described in this manual. Any other use not recommended by the manufacturer may cause fires or accidents to people.
•
Make sure that the electrical power available corresponds to the value indicated on the data plate (230V
~
/50Hz).
•
This appliance is not a toy. Make sure children are not left unattended and do not use the appliance as a toy.
•
This device is not intended for use by persons (including children) with reduced physical or mental capacity, or without specific experience and knowledge,
unless supervised or duly instructed on the use of the appliance by a person responsible for their safety.
•
Disconnect the appliance from the mains when not in use or during cleaning operations.
•
To do so, turn the switch to the O position and disconnect the plug from the socket. Pull the plug, not the cable.
•
Never block the combustion air inlets and fume outlets.
•
Do not touch the stove with wet hands; it contains electrical components.
•
Do not use the appliance in case of damaged cables or plugs. The device is classified as type Y: power supply cable may only be replaced by a
qualified technician. Should the power supply cable be damaged, it can be replaced only by the manufacturer or by its technical assistance service
or by a similarly qualified person.
•
Do not place any object on the cable and do not bend it.
•
Avoid using extension cables as their temperature may increase excessively posing fire hazards. Never use one single extension cable to power several
appliances.
•
During normal functioning some parts of the stove may become extremely hot, such as the door, the glass or the handle. Be careful, especially with
children. Do not touch any hot parts if not wearing adequate protective devices.
•
ATTENTION! DO NOT TOUCH the FIRE DOOR, the GLASS, the HANDLE or the FUME OUTLET DURING FUNCTIONING if not wearing adequate
protective devices since they become extremely hot!
•
Keep inflammable materials, such as furniture, cushions, pillows, blankets, paper, clothing, curtains, etc., at least 1.5 m away from the stove front and 30 cm
from the stove sides and back.
•
During operation, there is a risk of fire if the stove is covered or if it comes into contact with
flammable
material including curtains, draperies, covers, etc.
KEEP
THE PRODUCT AWAY FROM SUCH MATERIAL
.
•
Do not immerse the cable, plug or any other appliance component in water or other liquids.
•
Do not use the stove in dusty environments or wherever inflammable vapours are generated (e.g. in a workshop or garage).
•
The stove is fitted with components that generate arcs and sparks. Do not install the stove in areas posing a significant fire or explosion hazard due to a high
chemical substance concentration or to a high humidity level.
•
Do not use the appliance close to bathtubs, showers, basins, sinks or swimming pools.
•
Do not install the appliance underneath an air vent. Do not install the stove outdoors.
•
Do not repair, disassemble or modify the appliance. The appliance is not fitted with components that can be repaired by users.
•
Turn off the stove, disconnect it from the mains and wait until it has cooled down completely before performing any maintenance operations.
•
WARNING: DISCONNECT THE STOVE FROM THE MAINS BEFORE PERFORMING ANY MAINTENANCE.
•
ATTENTION! These stoves operate exclusively with pellets and olive pomace if the stove is designed for it; DO NOT USE DIFFERENT
COMBUSTIBLES: any other material burned will cause the apparatus to malfunction.
•
Keep the pellets in a fresh dry place: storing pellets in a place that is damp or excessively cold may reduce the stove potential heat output. Be
careful when storing and handling pellet bags to prevent pellet crushing and consequent sawdust production.
•
The fuel consists of small cylinders with 6-7mm diameter and a maximum length of 30mm. Their maximum moisture content is equal to 8%. This stove is
designed to burn pellets made of compacted sawdust obtained from different types of wood, in compliance with environment protection legislation.
•
The use of different types of pellets may result in a slight, sometimes even undetectable, change in the stove efficiency. This change can be counterbalanced
by increasing or decreasing the stove heat output by only one step.
•
Clean the burn pot on a regular basis upon every ignition or pellet refuelling.
•
The combustion chamber must be kept closed, except when loading or removing residues, in order to prevent smoke egress.
•
Do not switch the stove on and off intermittently to avoid damaging its electrical and electronic components.
•
Do not use the appliance as waste incinerator or for any other purpose other than the intended one.
•
Do not use liquid fuels.
•
Do not modify the appliance without prior authorisation.
•
Use only original spare parts recommended by the manufacturer.
•
Make sure that the stove is transported in compliance with safety regulations. Avoid any improper transfers or knocks that may damage the ceramics or the structure.
English - 4