EV Rider Stand N Ride SNR-1000 User Manual Download Page 15

WARRANTY TERMS

ONE-YEAR LIMITED WARRANTY

One year on all structural frame components; including tiller, base frame and seat post (if purchased with this 
option).

From one (1) year from the date of purchase, if any part or electronic component of the Scooter is
found upon examination to be defective in material and/or workmanship, it will be repaired or
replaced, at EV Rider's option, without charge. Labor charges are not provided under warranty.

The purchaser is responsible for the delivery to the authorized repair facility. Satisfactory proof of purchase, 
serial
number and the date of purchase are always required. For warranty service, please contact the
retail establishment from whom you purchased your EV Rider product.

ONE-YEAR WARRANTY EXCEPTIONS

Motor:  In cases where there is an increase in the operational noise level, the warranty does not
apply. (The increase in operational noise level usually occurs due to abusive and excessive
strain on the scooter.)

The battery is warranted by EV Rider for 6 months after the purchase of the product.

Warranty service can be performed by EV Rider or by an authorized EV Rider service
facility. Do not return faulty parts to EV Rider without prior consent. All transportation costs
and shipping damage incurred while submitting parts for repair or replacement are the
responsibility of the original purchaser.

WARRANTY EXCLUSIONS

This warranty is only given to the original purchaser of the Scooter. The Warranty excludes:

   

!

Consumable items which may need replacing due to normal wear and tear (tires, tubes, belts, bulbs,     
upholstery and seating, motor brushes, fuses, plastic shrouds and footrest covers, etc.)

   

!

Damaged caused by: battery fluid spillage or leakage, abuse, misuse, accident, or negligence, improper 
operation, excessive loading, maintenance, or storage, commercial use or use other than normal.

!

 Used other than for the purpose of the purchaser's mobility.

   

!

Repairs and/or modifications made to any part of the scooter without specific and prior consent from EV 
Rider, LLC

   

!

Labor, service calls, shipping, and other charges incurred for repair of the product not expressly approved 
by EV Rider.

Batteries

: Batteries carry a limited warranty which is subject to a stringent wear and tear clause. Any battery 

faults due to a defect in the original manufacture will normally become obvious within the first two months of 
use. Any gradual deterioration in performance after this period is normally associated with fair wear and tear, 
misuse or accidental damage and as such is not covered by the manufacturer's warranty.

There is no other express warranty.

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1) 
year from the date of the original purchase and to the extent permitted by law. Any and all implied warranties 
are excluded. This is the exclusive remedy. Liabilities for consequential damages under any and all warranties 
are excluded.

Page 14

Summary of Contents for Stand N Ride SNR-1000

















Reviews: