EV LIGHT EV BM1012, User Manual

Page: 7 / 11

5、
OPERATION MENU
-6-
Illustrations
：
When the menu is set as the information of * position, the projector will
be set automatically to be the main engine and then send data to external.
Other projectors can receive these data and run synchronously with the
main engine. It still be run according to these setting parameter even if
power reconnection after power off .
When setting YES in
【
Resume default
】
menu, The parameter will
bereset to be the factory default value as which with underline of above
chart.
Tab
Level 1 Level 2
DMX address 001-512
Pan invert Yes/No
Tilt invert Yes/No
P/T swap Yes/No
P/T Feedback Yes/No
Dimmer mode Dimmer1-4
CH mode 10CH/13CH
X -127-128
Y -127-128
Language English
Lightness 01-30
Backlight Permanently on/2 Minutes off
Red 0-255 *
Green 0-255 *
Blue 0-255 *
White 0-255 *
Shut 0-255 *
Colour wheel 0-255 *
Pan 0-255 *
Pan Fine 0-255 *
Tilt 0-255 *
Tilt Fine 0-255 *
Speed 0-255 *
Sound Running... *
Auto Running... *
Power reduction
100%/80%/50%
Resume default
Yes/No
Send parameter Yes/No
Sending current settings to other
fixtures,when receive sucessfully will
generate a reset.
Fixture reset Yes/No
Option
Display
Manual control
Test operation
(Calibrate XY)